07-2012, rev. 0712 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 signal relays n low profle, therefore particularly suited for fat pack components grouping n for relays with 1 or 2 form c (co) contacts: - creepage and clearance distances between contacts and frame >5mm or >10mm (depending on the relay version) - dielectric strength between contacts and frame 4kv rms or 6kv rms typical applications measuring and control systems, alarm and security equipment, road traffc and railway signaling systems contact data a104 a106 a204 a206 contact arrangement 4 form c, 6 form c, 4 form c, 6 form c, (4 co) (6 co) (4 co) (6 co) max. switching voltage 250vdc 250vdc 30vdc 30vdc 250vac 250vac 36vac 36vac limiting continuous current 50c ambient 2a 2a 2a 2a 75c ambient 1a 1a 1a 1a limiting making/breaking current 3a 1) 3a 1) 0.2a 0.2a contact material ag, ag, gold f 2) gold f 2) au-fashed au-fashed contact style bifurcated contacts frequency of operation, without load max. 30 operations/s operate / release time approx. 8/2ms max. dc breaking capacity (contacts ag, gold fashed) curve 1: arc extinguished within contact transit period (limit curve i) curve 2: safe breaking, erc extinguished (limit curve ii) electrical endurance type load operations ag, gold-fashed 2.4a, 24vdc, resistive appr. 1x10 6 ag, gold-fashed 3a, 24vdc, resistive appr. 0.3x10 6 ag, gold-fashed 1.35a, 30vdc, resistive appr. 6x10 6 ag, gold-fashed 0.85a, 40vdc, resistive appr. 2x10 7 ag, gold-fashed 0.36a, 60vdc, resistive appr. 8x10 7 ag, gold-fashed 0.21a, 110vdc, rersitive appr. 10x10 7 ag, gold-fashed 2.4a, 24vdc, resistive+100h3) appr. 1x10 6 ag, gold-fashed 0.6a, 60vdc, resistive+100h3) appr. 10x10 6 ag, gold-fashed 0.24a, 110vdc, resistive+100h3) 40x10 6 contact data (continued) mechanical endurance aaprox. 10 8 operations 1) the current of 3 a for max 4s at 10% on-time. 2) gold f on request only 3) self inductance in accordance with iec 255-0-20 coil data magnetic system neutral, monostable coil voltage range 5 to 60vdc max. coil temperature 110c thermal resistance 35k/w coil versions, monostable coil rated operate limiting coil rated coil code voltage voltage voltage resistance power 4/6 pole vdc vdc vdc ?10% 4) mw 032 5 3.3/4.0 10.8 38 658 012 6 3.9/4.6 12.4 50 720 017 12 7.8/9.5 24.0 185 778 021 24 15.5/18.5 47.0 730 789 026 48 32/37 88.0 2700 4) 853 014 60 38/45 109.0 4100 4) 878 4) coil resistance 15% all fgures are given for coil without pre-energization, at ambient temperature +23c the operating voltage limits u i and u ii depend on temperature according to the following formula: u i tamb = k i *u i 20c, u ii tu = k ii *u ii 20c; t amb = ambient temperature, u i tamb = minimum voltage at ambient temperature, u ii tamb = maximum voltage at ambient temperature, k i and k ii are factors. t amb 20c 30c 40c 50c 60c 70c k i 1 1.04 1.085 1.13 1.17 1.21 k ii 1 0.93 0.86 0.79 0.7 0.6 insulation data initial dielectric strength between coil and frame 500v rms between contact and contact 1000v rms between contact and frame 1000v rms between contact and coil 1000v rms card sn relay v23030 axicom
07-2012, rev. 0712 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 signal relays card sn relay v23030 (continued) other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.te.com/customersupport/rohssupportcenter ambient temperature -40 to +70c category of environmental protection iec 61810 rt i - dust protected, rt iii - immersion cleanable degree of protection, iec 60529 ip30, ip67 terminal type pcb-tht weight v23030-axxx approx. 12g v23030-cxxx approx. 30g v23030-hxxx approx. 25g v23030-jxxx approx. 30g ultrasonic cleaning not recommended packaging unit 5 pcs. pcb layout / terminal assignment bottom view on solder pins 4 form c (4 co) contacts v23030-axxxx-xx04 v23030-hxxxx-xx04 6 form c (6 co) contacts v23030-axxxx-xx04 v23030-hxxxx-xx04 hole m required only for relays with earth connection. hole m required only for relays with earth connection. axicom
07-2012, rev. 0712 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 3 signal relays card sn relay v23030 (continued) dimensions v23030-axxx, 4 form c (4 co) contacts, dust protected v23030-hxxx, 4 form c (4 co) contacts, immersion cleanable v23030-cxxx, 6 form c (6 co) contacts, dust protected v23030-jxxx, 6 form c (6 co) contacts, immersion cleanable axicom
07-2012, rev. 0712 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 4 signal relays card sn relay v23030 (continued) product code structure typical product code v23030 -a 1 021 -a1 04 type v23030 card sn relay contact arrangement a 4 form c, 4 co, dust proof c 6 form c, 6 co, dust proof h 4 form c, 4 co, immersion cleanable j 6 form c, 6 co, immersion cleanable earth connection 1 without earth connection 2 with earth connection coils coil code: please refer to coil versions table contact material a1 silver, gold fashed a2 gold f contact arrangement 04 4 form c, 4 co 06 6 form c, 6 co other types on request product code version coil arrangement enclosure part number v23030-a1xxx, 4 pole, without earth connection, dust protected v23030-a1017-a104 4 pole, without earth conn. 12vdc 4 form c (4 co) dust protected 3-1393801-6 v23030-a1021-a104 4 pole, without earth conn. 24vdc 4 form c (4 co) dust protected 3-1393801-8 v23030-a1026-a104 4 pole, without earth conn. 48vdc 4 form c (4 co) dust protected 4-1393801-1 v23030-a2xxx, 4 pole, with earth connection, dust protected v23030-a2012-a104 4 pole, with earth conn. 6vdc 4 form c (4 co) dust protected 4-1393801-4 v23030-a2017-a104 4 pole, with earth conn. 12vdc 4 form c (4 co) dust protected 4-1393801-8 v23030-a2017-a204 4 pole, with earth conn. 12vdc 4 form c (4 co) dust protected 4-1393801-9 v23030-a2021-a104 4 pole, with earth conn. 24vdc 4 form c (4 co) dust protected 5-1393801-0 v23030-a2026-a104 4 pole, with earth conn. 48vdc 4 form c (4 co) dust protected 5-1393801-2 v23030-a2014-a104 4 pole, with earth conn. 60vdc 4 form c (4 co) dust protected 4-1393801-6 v23030-c1xxx, 6 pole, without earth connection, dust protected v23030-c1017-a104 6 pole, without earth conn. 12vdc 6 form c (6 co) dust protected 6-1393801-2 v23030-c1021-a104 6 pole, without earth conn. 24vdc 6 form c (6 co) dust protected 6-1393801-3 v23030-c1021-a204 6 pole, without earth conn. 24vdc 6 form c (6 co) dust protected 6-1393801-4 v23030-c1026-a104 6 pole, without earth conn. 48vdc 6 form c (6 co) dust protected 6-1393801-7 v23030-c2xxx, 6 pole, with earth connection, dust protected v23030-c2012-a104 6 pole, with earth conn. 6vdc 6 form c (6 co) dust protected 6-1393801-9 v23030-c2017-a104 6 pole, with earth conn. 12vdc 6 form c (6 co) dust protected 7-1393801-1 v23030-c2017-a204 6 pole, with earth conn. 12vdc 6 form c (6 co) dust protected 7-1393801-2 v23030-c2021-a104 6 pole, with earth conn. 24vdc 6 form c (6 co) dust protected 7-1393801-3 v23030-c2014-a104 6 pole, with earth conn. 60vdc 6 form c (6 co) dust protected 7-1393801-0 axicom
|
